Jeep Wrangler Oil Light Reset:Quick and easy tutorial on how to reset maintenance oil light on Jeep Wrangler 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018.If reset is not performed after oil change the oil monitoring system will be unable to track when next oil change is due.Follow the procedure given below after every oil change.
Oil Change Light Reset Jeep Wrangle 2007-2017
1.Switch ignition “OFF”.
2.Next switch ignition “ON” to “POSITION 2′.
3.Ignition “ON” engine “OFF”.
4.Now depress gas paddle or accelerator paddle “THREE” time quickly.
This will reset oil maintenance light.Sometime you need to perform the procedure more than one one time if it fail first time.To verify if reset procedure completed successfuly or not follow the procedure given below.
How To Check Oil Percentage On Jeep Wrangler
1.Switch ignition “ON”.
2.PRESS “MENU” button on the left side of steering wheel.
3.Keep PRESSING “MENU” button till “VEHICLE INFO” display in cluster.
4.Now PRESS “DOWN ARROW” button two time.
5. “OIL LIFE 100% REMAINING” appear in cluster meter.
This confirm the oil life has been reset.If it don’t show 100% than you have to reset it again.
2007 2008 2009 2010 Jeep Wrangle Oil Capacity And Oil Type
Jeep Wrangler 3.8L Engine- Approximately 6 quarts (5.7 liters) of 5W-20 grade oil when engine oil and oil filter changed.
2011 Jeep Wrangler Oil Capacity And Oil Type
Jeep Wrangler 3.6L EGT Engine- Approximately 6 quarts (5.7 liters) of 5W-20 grade oil when engine oil and oil filter changed.
2012 2013 2014 2015 2016 2017 Jeep Wrangle Oil Capacity And Oil Type
Jeep Wrangler 3.6L ERB Engine – Approximately 6 quarts (5.7 liters) of 5W-20 grade oil when engine oil and oil filter changed.
Notice
Due to wide range of vehicle make and model content in this post should not be specific to any vehicle.Please check with Wrangler owner manual for correct specification for your vehicle.Information in this post Jeep Wrangler oil reset is for training purpose and to be used as guideline only.
Thank You
