How To Reset Oil Jeep Wrangler 2018-2022

Jeep Wrangler Oil Light Reset:Quick and easy tutorial on how to reset Jeep Wrangler oil change maintenance light 2018 2019 2020 2021 2022.If reset is not done the oil monitoring system will be unable to track properly when next oil change is due.Follow the procedure given below after every oil change.

Jeep Wrangler Oil Life Reset 2018 2019 2020 2021 2022

1.Turn “KEY” “ON” to “POSITION 2”.

2.Vehicle with “PUSH START” button PRESS the “START BUTTON” “TWO” times

3.Ignition “ON” engine “OFF”.

4.PRESS “DOWN ARROW” button on steering wheel till “VEHICLE INFO” display in cluster screen.

5.Now PRESS “LEFT ARROW” button until “OIL LIFE” display in cluster screen.

6.PRESS and HOLD “OK” button on steering wheel.

7.This will reset “OIL LIFE to 100%” .

2018 2019 2020 Jeep Wrangler Oil Capacity And Oil Type

Jeep Wrangler 2.0L Engine – Approximately 5 quarts (4.7 liters) of 5W-30 grade oil when engine oil and oil filter changed.

Jeep Wrangler 3.6L – Approximately 5 quarts (4.7 liters) of 0W-20 grade oil when engine oil and oil filter changed.

2021 2022 Jeep Wrangler Oil Capacity And Oil Type

2.0L Engine-Approximately 5 quarts (4.7 liters) of 5W-30 grade oil when engine oil and oil filter changed.

3.6L Engine – Approximately 5 quarts (4.7 liters) of 0W-20 grade oil when engine oil and oil filter changed.

3.0L Diesel Engine- Approximately 9 quarts (8.5 liters) of 5W-40 grade oil when engine oil and oil filter changed.

Notice

Due to wide range of vehicle make and model content in this post should not be taken specific to any vehicle.Please check with Jeep owner manual for correct specification for you vehicle.Information in this post Jeep Wrangle oil life reset is for training purpose and to be used as guideline only.

Thank You

You Can Also Read :-

Leave a Comment