How To Reset Oil Service Indicator Suzuki S-Cross

Suzuki S-Cross Service Reset-In this post I am going to tell service reset or oil rest proceduer for Suzuki S-Cross.When service light begin to iluminate in cluster meter you need to do the oil change and perform service reset.If reset is not performed system will not identify when next oil change is due.So it is recommended to do reset when you change the engine oil.Follow the steps given bellow to perform the reset manually.

S-Cross Oil Light Reset Service Reset

1.Ignition “ON” engine “OFF”.

2.Press “KNOB” on right of cluster meter.

3.Continue PRESSING the “KNOB” till “SETTING MODE” begin to display in cluster.

4.Now by rotating the “KNOB” scroll down to “OIL CHANGE”.

5.Now PRESS the “KNOB”.

6. “OIL CHANGE” will open in cluster meter.

7.Now rotate the “KNOB” and scroll down to “RESET” “OC”.

8.Again PRESS the “KNOB”.

9. “SUCCESSFUL” will display in cluster meter.

Thats how you reset service light on Suzuki S-Cross.

S-Cross Engine Oil Capacity And Grade

1.5L Petrol Engine-Approximately 3.1 liters of 0W-16 grade oil when engine oil and oil filter changed.

S-Cross DDIS 200 Diesel Engine Oil Capacity And Grade

Approximately 3.2 liters of 5W-30 grade oil when engine oil and oil filter changed.

S-Cross DDIS 320 Diesel Engine Oil Capacity And Grade

Approximately 5.25 liters of 0W-30 grade oil when engine oil and oil filter changed.

Notice

Please check with owner manual for correct specification for your vehicle. Information in this post for training purpose and to be used as guideline only.

Thank You.

You Can Also Read :-

Leave a Comment