How To Reset Oil Service Indicator On Skoda Fabia 2017

Skoda Fabia Service Reset:Quick and easy tutorial on how to do service reset on Skoda Fabia 2017 .When inspection tool sign begin to blink on cluster meter you need to do maintenance service and perform oil reset.If reset is not done system will be unable to identify when next oil change is due.

2017 Skoda Fabia Oil Change Light Reset

1.Switch “OFF” the car.

2.PRESS the reset button”[ 0.0 ]”on cluster meter for few second.

3.After few second switch “ON” ignition.

4.After switching on ignition release “RESET” button you will see tool sign has stop blinking.

5.Now PRESS “TRIP” button one time which is on left side of “[ 0.0 ](reset button)” on cluster meter.

6.You will find inspection tool button had disapper from cluster meter.

7.Switch OFF ignition pull key out from “KEY FOB”.

By following this reset proceduer you can perform oil reset in Skoda Fabia.

2017 Skoda Fabia Engine Oil Capacity And Viscosity

1.0L Petrol Engine -Approximately 4 liters of VW 502 00 oil when engine oil and oil filter are changed.

1.6L Petrol Engine -Approximately 4 liters of VW 502 00 oil when engine oil and oil filter are changed.

1.4L Diesel Engine – Approximately 4.1 liters VW 507 00 oil when engine oil and oil filter are changed.

Notice

Due to wide range of vehicle make and model content in this post should not be taken specific to any vehicle.Please check with owner manual of Fabia for correct specification for your vehicle. Information in this post Skoda Fabia service reset is for training purpose and to be used as guideline only.

Thank You

You Can Also Read :-

Leave a Comment