How To Reset Oil Subaru Ascent 2019-2022

How To Reset Oil Service Reminder Subaru Ascent :Quick and easy tutorial on how to reset maintenance reminder on Subaru Ascent 2019 2020 2021 2022.If reset is not performed the oil monitoring system is unable to track properly when next oil change is due.Follow the procedure given below after every oil change to reset maintenance reminder light.

How To Reset Subaru Ascent Oil Change Inspection Light

1.Turn Ignition ON engine OFF.

2.Press down arrow button untill “Press and Hold ENTER button to access setting screen” appear in monitor screen display.

oil reset subaru ascent

3.Now press and hold ENTER button SETTINGS menu open in monitor screen display.

4.Scroll down to MAINTENANCE using down arrow button and press ENTER button.

5.MAINTENANCE menu open in monitor screen display.

6.Scroll to ENGINE OIL and press ENTER button.

7.ENGINE OIL menu open here you can set engine oil change distance and date.

8.Next press UPDATE button to reset engine oil.

9.Now press GO BACK button and press OIL FILTER.

10.OIL FILTER menu open here again set distance and date and press UPDATE button.

2019-2022 Subaru Ascent Engine Oil Capacity And Oil Type

2.4L Engine – Approximately 4.8 quarts (4.5 liters) of 0W-20 grade oil when engine oil and oil filter changed.


Due to wide range of vehicle make and model information here should not be taken specific to any vehicle. Please check with owner manual for correct specification for your for your vehicle. Instruction given here are based on Subaru owner manual and to be used as guideline only.

You Can Also Read :-

Leave a Comment