How To Reset Oil Ford Ranger: Quick and easy tutorial on how to reset maintenance light on Ford Ranger 2013 2014 2015 2016 2017 2018 2019 2020 2021 2022 2023. If reset is not done the oil monitoring system is unable to track correctly when next oil change is due.
Maintenance Light Reset Ford Ranger 2013-2018
1.Turn ignition OFF. Press gas and brake pedal to the ground and turn ignition ON without starting the vehicle.
2.Continue to press gas and brake pedal to the ground. After few seconds service light will start to blink keep both gas and brake pedal until service light stop and disappear.
3.Once service light disappear turn ignition OFF.
Ford Ranger Oil Service Life Reset 2019-2023
1.Turn ignition On to second position without starting your Ford Ranger.
2.Press left arrow button on steering wheel to enter MAIN MENU.
3.From main menu scroll down to SETTINGS and press right arrow button.
4.Settings menu display on the dash, next scroll to VEHICLE and press right arrow button.
5.Vehicle menu display on the dash, next scroll to OIL LIFE and press right arrow button.
6.From this menu scroll to HOLD OK TO RESET and press and hold OK button to reset oil to 100%.
2012-2023 Ford Ranger Engine Oil Capacity And Oil Grade
2.3L engine requires approximately 4.0 quarts (3.8 liters) of 5W-20 grade oil when engine oil and oil filter changed.
3.0L engine requires approximately 5.0 quarts (4.7 liters) of 5W-20 grade oil when engine oil and oil filter changed.
4.0L engine requires approximately 5.0 quarts (4.7 liters) of 5W-30 grade oil when engine oil and oil filter changed.
Please check with Ford Ranger owner manual for correct specification for your vehicle. Information here are based on Ford Ranger owner manual and to be used as guideline only.
You Can Also Read :-
- How To Reset Oil Ford Mustang 2011-2023
- How To Reset Oil Ford Taurus 2010-2019
- How To Reset TPMS Ford Ranger 2016-2021