How To Reset Oil Life On Fiat 124 Spider 2016-2020

How To Reset Oil Life On Fiat 124 Spider:Quick and easy tutorial on how to reset oil maintenance life on Fiat 124 Spider 2016 2017 2018 2019 2020.If reset is not done the oil monitoring system is unable to track properly when next oil maintenance is due. Follow the procedure given below to reset maintenance after every oil change.

How To Reset Oil Maintenance Light On Fiat 124 Spider 2016-2020

1.Turn Ignition ON by pressing Engine Start/Stop button.

2.Ignition ON do not start the engine.

3.Fully press the accelerator pedal to the floor slowly THREE times within TEN seconds.

4.Now turn OFF ignition by pressing Engine Start/Stop button.

Fiat 124 Spider Oil Maintenance Light Reset 2016-2020

You can also reset oil maintenance light from multimedia system by following the procedure given below.

1.Turn ignition On by pressing Engine Start/Stop button without pressing brake pedal.

2.Use multimedia control knob located in gear shifter console and scroll to APPLICATION in multimedia screen and press multimedia control knob.

3.APPLICATION menu will open in multimedia screen.

4.Scroll down to MAINTENANCE and press multimedia control knob.

5.MAINTENANCE menu open in multimedia screen.

6.Scroll to SCHEDULED and press multimedia control knob.

7.SCHEDULED menu open in multimedia screen.

8.Set TIME and DISTANCE using multmedia control knob.

10.Once TIME and DISTANCE is set scroll down to RESET and press multimedia control knob to confirm.

Fiat 124 Spider Engine Oil Capacity And Oil Type

1.4 Turbo engine holds approximately 4.0 quarts (3.8 liters) of 5W-40 grade oil when engine oil and oil filter are changed.

Notice

Due to wide range of vehicle make and model instruction in post should not be taken specific to any vehicle.Please check with 124 Spider owner manual for correct specification for your vehicle.Instruction given here is for training purpose and to be used as guideline only.

Thank You.

You Can Also Read:

Leave a Reply