How To Reset Maintenance Light On Toyota 4Runner 2003-2008

How To Reset Maintenance Light On Toyota 4Runner : Quick and easy tutorial on how to reset oil maint light on Toyota 4Runner 2003 2004 2005 2006 2007 2008 2009.If reset is not done the oil monitoring system is unable to track correctly when next oil maintenance is due.

Toyota 4Runner Oil Change Maintenance Light Reset 2003-2006

1.Turn ignition key to ON position.

2.Press ODO/TRIP button to reset trip ODO mileage to original mileage.

Toyota 4Runner Oil Reset

3.Once on ODO mileage turn ignition key OFF.

4.Next press and hold RESET button and after few second turn ignition key to ON position.

5.MAINT light start to blink in instrument cluster.

6.After few second MAINT light disappear from from instrument cluster.

7.Turn ignition key OFF and then turn on the vehicle.

Reset Maintenance Light Toyota 4Runner 2007-2008

1.Turn Ignition ON to second position.

2.Press Trip meter reset button and go to ODO on mileage screen.

Oil Reset Toyota 4Runner

3.Once on ODO turn ignition key OFF.

4.Next press and hold Trip meter reset button and turn ignition ON.

5.MAINT light start to blink in instrument cluster and after few seconds turn OFF.

6.Turn ignition OFF and start the vehicle.

Once MAINT light turn OFF reset procedure is completed. On some vehicle dash line start to blink on mileage screen and turn OFF when reset is completed.

2003-2008 Toyota 4Runner Engine Oil Capacity And Oil Type

4.0 L V6 (1GR-FE) Engine – Approximately 5.5 quarts (5.2 liters) of 5W-30 grade oil when engine oil and oil filter changed.

4.7 L V8 (2UZ-FE) Engine – Approximately 6.5 quarts (6.2 liters) of 5W-30 grade oil when engine oil and oil filter changed.

Notice

Please check with Toyota 4Runner owner manual for correct specification for your vehicle. Instruction given here are based on Toyota 4Runner owner manual and to be used as guideline only.

You Can Also Read :-

Leave a Comment