How To Reset Oil Change Indicator Renault Duster 2014

Oil Reset Renault Duster service reset:Quick and easy tutorial on how to reset service light on Renault Duster 2014 .When spanner light begin to display in cluster meter you need to change engine oil and perform reset.By following steps given below you can perform oil reset in Renault Duster manually.If reset is not done system will not identify when next oil change is due.

Renault Duster Service Reset 2014 Manually

1.Switch “OFF” ignition and then switch “ON” ignition.

2.PRESS top button with “THREE DOT” on wiper lever on right of steering wheel.

3.When you PRESS “THREE DOT” button mode will change in cluster meter.

4.PRESS it multiple time till “FOUR DASH” and “KM” begin to display in cluster meter ( _ _ _ _ KM)

5.Now PRESS the “THREE DOT” button on top of wiper lever for “FIVE” to “TEN” seconds.

6.You will see “FOUR DASH” ( _ _ _ _ km ) will start blinking in cluster meter.

7.Now you will see 10000 KM set on cluster meter screen .

8.Now release the “THREE DOT” button on wiper lever.

Reset completed for 10000 km switch OFF car pull the key out.After few second start the car you will find service warning light has disapper from cluster meter screen.

2014 Renault Duster Engine Oil Capacity And Grade

1.5 dCi Engine- Approximately 4.50 liters of 5W-30 grade oil when engine oil and oil filter changed.

1.6 16V Engine – Approximately 4.80 liters of 5W-30 grade oil when engine oil and oil filter changed.

2.0 16V Engine- Approximately 5.40 liters of 5W-30 grade oil when engine oil and oil filter changed.

Notice

Please check with owner for correct specification for your vehicle.Information in this post is for training purpose and to be used as guideline only.

Thank You.

You Can Also Read :-

Leave a Comment