How To Reset Oil Subaru Crosstrek 2018

Oil Reset Subaru Crosstrek:Quick and easy tutorial on how to oil reset Subaru Crosstrek 2018.If reset is not done system will not identify when next oil change is due.Follow the step by step procedure given below to reset maintenance reminder after every oil change.

How To Oil Reset Subaru Crosstrek 2018

1.Power ignition “ON” “POSITION 2”.

2.PRESS and HOLD the “INFO” button on steering wheel.

3. “SETTINGS” menu will open in monitor screen.

4.Scroll down to “MAINTENANCE” using “UP” “DOWN” arrow button on steering wheel.

5.PRESS “[ i ]/SET” button between “UP” “DOWN” arrow button to select “MAINTENANCE”.

6. “MAINTENANCE” menu will open in monitor screen.

7.Scroll to “ENGINE OIL” using “UP” “DOWN” arrow button.

8.PRESS the “[ i ]/SET” button to select “ENGINE OIL” in the car monitor screen.

9.NOTIFICATION DISTANCE REMAINING 10000 display in monitor screen.

10.PRESS “[ i ]/SET” button to “SET”.

11.SETTING COMPLETE display in monitor screen.

Maintenance Light Reset Subaru Crosstrek 2018 Quick Guide

  1. PRESS “POWER” button to “POSITION 2”.
  2. Ignition “ON” engine “OFF”.
  3. PRESS and HOLD “INFO” button.
  4. “SETTING” open in monitor screen.
  5. Select “MAINTENANCE” and DEPRESS the “[ i ]/SET” button.
  6. “MAINTENANCE” menu open in monitor.
  7. Select “OIL CHANGE” and PRESS “[ i ]/SET” button in monitor screen.
  8. “NOTIFICATION DISTANCE REMAINING” will display.
  9. PRESS “[ i ]/SET” button to “SET”.
  10. “SETTING COMPLETE” display in monitor.

2018 Subaru Crosstrek Engine Oil Viscocity And Capacity

Approximately 4.7 quants (4.4 liters) of OW-20 synthetic oil when engine oil and oil filter are changed.

Notice

Content in this post should not be taken specific to any vehicle. Please check with owner manual for correct specification for your vehicle. Information in this post oil reset Subaru Crosstrek is for training purpose and to be use as guideline only.

You Can Also Read :-

Leave a Comment