How To Reset Oil Change Light Toyota Tacoma 2006-2015

Oil Change Light Reset Toyota Tacoma:Quick and easy tutorial on how to reset maint reqd light on Toyota Tacoma 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015.If reset is not done oil monitor system will be unable to detect when next oil change is due.Follow the procedure below after every oil change to reset maintenance light on Toyota Tacoma

How To Reset Maintenance Light On Toyota Tacoma 2006-2015

1.Turn ignition “ON” to “POSITION 2”.

2.Ignition “ON” engine “OFF”.

oil reset toyota tacoma

3.PRESS “TRIP” reset button till “ODO” appear in cluster meter.

4.Now turn ignition “OFF”.

5.PRESS and HOLD “RESET” button and turn ignition “ON”.

6. [ – – – – – ] start to flash on cluster meter continue to PRESS and HOLD “RESET” button.

7.After few seconds 000000 display in odometer screen

8.Now RELEASE the “RESET” button.

This will reset oil maint reqd light ,if system fails to reset maint reqd light will continue to flash.Follow each steps correctly and repeat this procedure.

2006 Toyota Tacoma Engine Oil Capacity And Oil Type

2TR-FE Engine- Approximately 6.1 quarts (5.8 liters) of 5W-30 grade oil when engine oil and oil filter changed.

1GR-FE Engine – Approximately 4.8 quarts (4.5 liters) of 5W-30 grade oil when engine oil and oil filter changed.

2007 2008 2009 Tacoma Engine Oil Capacity And Oil Type

2.7 L 4-Cylinder Engine- Approximately 6.1 quarts (5.8 liters) of 5W-30 grade oil when engine oil and oil filter changed.

4.0 L V6 Engine – Approximately 4.8 quarts (4.5 liters) of 5W-30 grade oil when engine oil and oil filter changed.

2010 Tacoma Engine Oil Capacity And Oil Type

2.7 L 4-Cylinder Engine- Approximately 6.1 quarts (5.8 liters) of 5W-20 or 0W-20 grade oil when engine oil and oil filter changed.

4.0 L V6 Engine- Approximately 4.8 quarts (4.5 liters) of 5W-20 grade oil when engine oil and oil filter changed.

2011-2015 Tacoma Engine Oil Capacity And Oil Type

2.7 L 4-Cylinder Engine- Approximately 6.1 quarts (5.8 liters) of 0W-20 grade oil when engine oil and oil filter changed.

4.0 L V6 Engine 2WD Model – Approximately 4.8 quarts (4.5 liters) of 0W-20 grade oil when engine oil and oil filter changed.

4.0 L V6 Engine 4WD Model – Approximately 5.5 quarts (5.2 liters) of 0W-20 grade oil when engine oil and oil filter changed.

Notice

Due to wide range of vehicle make and model content in this post should not be taken specific to any vehicle.Please check with Toyota Tacoma owner manual for correct specification for your vehicle.Information in this post oil reset Toyota Tacoma is for training purpose and to be used as guideline only.

Thank You.

You Can Also Read :-

Leave a Comment