How To Maintenance Reset Honda Civic 2006-2011

Maintenance Light Reset Honda Civic:Quick and easy tutorial on how to reset the Honda Civic oil light 2006 2007 2008 2009 2010 2011.If reset is not done the oil monitor is unable to track correctly when next oil change is due.Follow the procedure give below after each oil change.

2006-20011 Maintenance Light Reset Honda Civic

1.Turn ignition to POSITION TWO.

2.Ignition ON engine OFF.

 honda civic maintenance oil

3.PRESS SEL/RESET button untill OIL LIFE % appear in instrument cluster screen.

4.PRESS and HOLD SEL/RESET button on dash board for TEN seconds.

5.Service light start to flash in instrument cluster.

6.Release the SEL/RESET button and again PRESS and HOLD SEL/RESET button for FIVE second.

7.Service light will STOP flashing and OIL LIFE 100% appear in instrument cluster screen.

2007-2011 Honda Civic Engine Oil Capacity And Oil Type

1.3L Engine – Approximately 3.2 liters (3.4 quarts) of 0W-20 grade oil when engine oil and oil filter changed.

1.8L Engine – Approximately 3.7 liters (3.9 quarts) of 5W-20 grade oil when engine oil and oil filter changed.

2.0L Engine – Approximately 4.4 liters (4.6 quarts) of 5W-30 grade oil when engine oil and oil filter changed.


Due to wide range of vehicle make and model content in this post should not be taken specific to any vehicle.Please check with Civic owner manual for correct specification for your vehicle.Information in this post maintenance reset Honda Civic is for training purpose and to be used as guideline only.

Thank You.

You Can Also Read :-

Leave a Comment