How To Reset Oil Service Indicator Kia Seltos 2019

Kia Seltos Oil Reset 2019:In this post I am going to tell proceduer to reset service light on Kia Seltos.When Service required begin to display in cluster meter you need to do maintenance service and perform oil reset.So that system can track when next oil change is due.To do this reset I am using LAUNCH scanning tool.

Kia Seltos Oil Reset 2019 Service Light Reset

1.Connect scanner “VCI” to the “OBD” port.

2.Open “LAUNCH” app.

3.Select “INTELLIGENCE DIAGNOSIS”.

4.System will connect with scanner select “16 PIN”.

5.Select “AUTOMATICALLY SEARCH”.

6.Auto scan will open “HELP INFORMATION” tab with vehicle “VIN” information PRESS “OK”.

7.Select “GENERAL AREA” and next “SELTOS” and next PRESS on “YEAR”.

8.Select “SPECIAL FUNCTION”.

9.From “SPECIAL FUNCTION” tab select “BCM(Body Control Moduel)>IC(Instrument cluster) SERVICE REMINDER SETTING”.

10.Notes tab will open PRESS “OK”.

11.Active Test page will open PRESS “RESET”.

12.Help Information “RESET COMPLETED” tab will open PRESS “OK”.

Service light reset proceduer completed on Kia Seltos 2019 model.

2019 Kia Seltos Engine Oil Capacity And Viscosity

1.4L Turbo Engine-Approximately 4.4 quarts (4.2 liters) of 0W-30 or 5W-30 grade oil when engine oil and oil filter are changed.

1.5L Petrol Engine-Approximately 4 quarts (3.8 liters) of 5W-30 grade oil when engine oil and oil filter changed.

1.5L Diesel Engine-Approximately 5.07 quarts (4.8 liters) of 5W-30 grade oil when engine oil and oil filter changed.

Notice

Due to wide range of vehicle make and model content in this post should not be taken specific to any vehicle.Please check with owner manual for correct specification for your vehicle.Information in this post is for training purpose and to be used as guideline only.

Thank You

You Can Also Read :-

Leave a Comment