Hyundai Creta Service Reset :In this tutorial I am going to tell service light reset proceduer for Hyundai Creata.When service light begin to display in cluster meter you need to reset so system can identify when next oil change is due.Make sure to change engine oil before performing this reset.To complete this process I am using scanplusX scanning tool.
OBD port location Hyundai Creta: Creta OBD is located right side of steering wheel behind the flap.
Hyundai Creta Oil Reset 2017 service light reset
1.Connect “VCI” to “OBD” port and open scanplus app.
3.Select “16 PIN DLC”.
4.Click “SELECT MENU MANUALLY”.
7.Select 2017(you can choose the year according to car year).
8.Select G 1.6 MPI (you can choose according to engine varient).
9.Click “SPECIAL FUNCTION”.
10.From specail function page select BCM(Body control module)>Cluster Module-Service Reminder Setting
11.Active Test page will open PRESS “RESET”.
12.Reset completed tab will open PRESS “OK”.
Oil reset proceduer on Hyundai Creta has been done succesfully.Switch ignition ON and start engine to confirm.
2017 Hyundai Creta Engine Oil Capacity And Grade
1.6L Creta Petrol – Approximately 3.6 liters of 5W-30 grade oil when engine oil and oil filter changed.
1.4L Creta Diesel – Approximately 5.3 liters of 5W-30 grade oil when engine oil and oil filter changed.
1.6L Creta Diesel- Approximately 5.3 liters of 5W-30 grade oil when engine oil and oil filter changed.
Please check with owner manual for correct specification for your vehicle.Information in this post Hyundai Creta service reset is for training purpose and to be used as guide line only.
You Can Also Read :-
- How To Service Reset Mercedes B-Class Mercedes B180
- How To Reset Oil Service Indicator On BMW 1-Series