Honda P0154-Air/Fuel Ratio Sensor 1 Heater System Malfunction

Honda P0154 Air/Fuel Ratio Sensor Bank 2 Sensor 1 Heater System Malfunction

Code P0154 Honda is DTC code indicates a malfunction in oxygen sensor circuit bank 2 sensor 1. This oxygen sensor is located on side of the engine with second cylinder. It is in charge for measuring the oxygen content in the exhaust gas.

Fault Location-Air/Fuel Ratio Sensor Bank 2 Sensor 1

Possible Causes Code P0154 Honda

1.Failed oxygen sensor on bank 2 sensor 1 providing incorrect reading or no reading to ECM.

2.Damaged, corroded or disconnected wiring or connector of oxygen sensor circuit causing inaccurate reading or lack of signal.

3.Malfunctioning engine control module preventing oxygen sensor from functioning properly or produce incorrect reading.

4.Leaks in exhaust system can affect oxygen sensor capability to measure oxygen content in exhaust gas and giving inaccurate reading.

5.Clogged fuel injector or malfunctioning fuel pressure regulator can cause incorrect air/fuel ratio leading to abnormal oxygen sensor reading.

6.Failed or failing catalytic converter can cause oxygen sensor to give inaccurate reading.

Honda P0154 DTC Code Possible Symptoms

1.Abnormal oxygen sensor reading can cause engine to run too rich or too lean leading to decreased fuel efficiency.

2.Malfunctioning oxygen sensor can affect air/fuel ratio leading to poorly running engine resulting hesitation, rough idling or lack of power in engine.

3.Malfunctioning oxygen sensor can lead to fail emissions test of the vehicle.

4.Smell of unburned gasoline from exhaust system.

5.Engine check light illuminates on dashboard is most common symptoms of p0154.

How To Fix Code P0154 Honda

1.Inspect connector and wiring of oxygen sensor circuit for damage or corrosion. Repair or replaced damaged connector or wiring.

2.If wiring and connector are intact replace the oxygen sensor bank 2 sensor 1.

3.Check fuel injector operation, fuel filter operation and fuel pressure if there is a problem repair or replace the faulty component.

4.Check for exhaust leaks and repair them as necessary.

5.Replace catalytic converter if it is failing or has failed.

6.If non of the above mention steps resolve the issue the engine control module may be malfunctioning replace it or reprogram it.

Notice

Its important to have the vehicle inspected and diagnosed by professional mechanic to find and resolve issue related with p0154 for proper repair.

You Can Also Read :-

Leave a Comment