Ford P1450-Unable To Bleed Up Fuel Tank Vacuum

Ford P1450 DTC Code Unable To Bleed Up Fuel Tank Vacuum

Code P1450 Ford is DTC code indicating issue related to the evaporative emission control system. The evaporative emission control system is designed to capture and store fuel vapors from fuel tank and prevent them from being released into the atmosphere.

When vehicle onboard computer PCM(Powertrain Control Module) perform self-test of the evaporative emission system. It monitors the vacuum level in the system. If powertrain control module detect that the system is unable to achieve or maintain the required vacuum it trigger p1450 code.

Possible Causes Code P1450 Ford

1.Malfunctioning or stuck EVAO canister vent solenoid can trigger p1450. The vent solenoid is responsible for controlling the flow of vapors from fuel tank to the charcoal canister. If it fails or get stuck it trigger this code.

2.Purge valve is responsible for controlling the flow of fuel vapors from canister to the engine for combustion. If EVAP purge valve is faulty or malfunctioning it can trigger p1450.

3.Wiring harness and connector can become damage or corroded overtime. Faulty wiring or connector can disrupt signal between various component of the evaporative emission system triggering p1450.

4.If the hoses that connect various components of the evaporative emission system become blocked or damaged it can disrupt flow of vapors triggering p1450.

5.Fuel tank pressure sensor measures the pressure inside the fuel tank. If fuel tank pressure sensor fail or gives incorrect reading it can cause p1450 code to appear.

6.Loose or missing fuel tank cap can cause fuel tank to lose pressure and trigger p1450.

Ford P1450 Possible Symptoms

1.Noticeable fuel odor particularly around the fuel tank area or near the vehicle rear may be present.

2.Malfunctioning EVAP system can cause difficulty in starting the engine resulting rough idle due to imbalance in air to fuel ratio.

3.Leaking or malfunctioning EVAP system can lead to increased fuel consumption and decreased fuel efficiency.

4.Vehicle may fail emissions test. This indicate that EVAP system is not functioning properly leading to increased emissions.

How To Fix P1450 Ford

1.Ensure that the gas cap is properly tightened loose gas cap can trigger this code. Tighten the fuel tank cap or replace it if found faulty.

2.Inspect fuel tank pressure sensor and its wiring for any signs of damage or corrosion. If sensor is having any issue repair or replace the sensor as required.

3.Inspect evaporative emission control system hoses for cracks, leaks or disconnections. Repair or replace any damaged hoses.

4.Verify purge control valve operation ensure that the valve is functioning correctly. You may need diagnostic tool to test the valve.


Its important to have the vehicle inspected and diagnosed by professional mechanic to find and resolve issue related with Ford p1450 for proper repair.

You Can Also Read :-

Leave a Comment