Ford P0022-Camshaft Position ‘A’ Timing Over-Retarded Bank 2

Code P0022 Ford is DTC code indicating that the timing of the intake camshaft on bank 2 is delayed or retarded beyond the limits set by the manufacturer.

Possible Causes Code P0022 Ford

1.The camshaft position sensor provides the ECM with information about the camshaft’s position. If the camshaft position sensor is faulty or sends incorrect signals, ECM may not be able to properly control the camshaft timing.

2.Variable valve timing system have VVT solenoids or actuators that control the camshaft timing adjustments. These components can become stuck or can malfunction leading to incorrect camshaft timing.

3.Low engine oil level or degraded oil can affect the variable valve timing system operation leading to timing issue.

4.If timing chain or belts that connect the camshaft to the crankshaft is loose or damaged it can cause improper timing triggering p0022.

5.Electrical issue such as damaged wiring or loose connection can disrupt communication between engine control module and the variable valve timing system resulting in incorrect camshaft timing.

6.In some cases the problem may not be with the physical components but rather with the engine control module software or calibration. A software glitch or outdated calibration can cause timing problems.

7.Issue such as low compression or valve train problem can indirectly affect camshaft timing and trigger p0022.

Ford P0022 Possible Symptoms

1.Illumination of the check engine light on the dash is most common symptoms of p0022.

2.Improper camshaft timing can result in reduced engine performance. Engine may feel sluggish, lack power and you may experience a noticeable decrease in acceleration.

3.Due to timing issue affecting the combustion process the engine may experience decreases fuel efficiency leading to lower miles per gallon.

4.Incorrect camshaft timing can cause the engine to idle rough. Idle speed may fluctuate making the vehicle feel unstable when stopped.

5.The engine may not respond as expected to throttle input leading to jerky movements during acceleration. Engine may experience surging or hesitation during acceleration.

6.Incorrect camshaft timing can result in increased emission potentially causing the vehicle to fail emission test.

7.Camshaft timing issues can lead to engine misfire, which may be felt as vibration or rough running.

How To Fix P0022 Ford

1.Inspect the camshaft position sensor for any signs of damage or corrosion. If camshaft position sensor is faulty replace it with a new sensor.

2.Inspect the variable valve timing solenoids or actuator on bank 2. Ensure they are functioning correctly and are not stuck or clogged with debris.

3.Low oil level or degraded oil can affect the variable valve timing system operation. Verify that the engine oil is within the recommended range and that the oil is of correct type and quality.

4.Inspect wiring harness and connector associated with camshaft position sensor and variable valve timing components. Look for any signs of damage, loose connection or corrosion.

5.For vehicle with a timing belt check for signs of damage or wear in the timing belt. If required replace the timing belt or timing chain .

6.If there are no physical issues with the components check if there’s a software update available for the engine control module. In some cases software glitch or outdated calibration could be causing the timing problem.


Its important to have the vehicle inspected and diagnosed by professional mechanic to find and resolve issue related with Ford p0022 for proper repair.

You Can Also Read :-

Leave a Comment